National Instruments Data Acquisition Device E Series - Manual (Page 186)

Appendix A Device-Specific Information
© National Instruments Corporation A-51 E Series User Manual
For a detailed description of each signal, refer to the I/O Connector Signal
Descriptions section of Chapter 1, DAQ System Overview .
NI 6032E Pinout
Figure A-45 shows the NI 6032E device pinout.
Note Some hardware accessories may not yet reflect the NI-DAQmx terminal names. If
you are using an E Series device in Traditional NI-DAQ (Legacy), refer to Table 1-5,
Terminal Name Equivalents , for the Traditional NI-DAQ (Legacy) signal names.