National Instruments Data Acquisition Device E Series - Manual (Page 240)

Appendix B I/O Connector Pinouts
© National Instruments Corporation B-3 E Series User Manual
100-68-68-Pin
100-68-68-Pin Extended AI I/O Connector Pinout
When you use an NI 6031E/6033E/6071E with an SH1006868 cable, the
I/O signals appear on two 68-pin connectors. Figure B-1 shows the pinouts
of the two connectors.
100-68-68-Pin Extended DIO I/O Connector Pinout
When you use an NI 6025E with an SH1006868 cable, the I/O signals
appear on two 68-pin connectors. Figure B-2 shows the pinouts of the
two connectors.
NI PCI-6071E SH1006868 Refer to Figure B-1.
SH100100 Refer to Figure A-87.
R1005050 Refer to Figure B-3.
NI PCI-MIO-16E-1
(NI 6070E) SH6868EP Refer to Figure A-88.
SH6850 Refer to Figure B-4.
NI PCI-MIO-16E-4
(NI 6040E) SH6868EP Refer to Figure A-55.
SH6850 Refer to Figure B-4.
NI PCI-MIO-16XE-10
(NI 6030E) SH6868EP Refer to Figure A-43.
SH6850 Refer to Figure B-4.
NI PCI-MIO-16XE-50
(NI 6011E) SH6868EP Refer to Figure A-2.
SH6850 Refer to Figure B-4.
Table B-1. E Series I/O Connector Pinouts (Continued)
E Series Device Typical Cable Accessory