National Instruments Data Acquisition Device E Series - Manual (Page 13)

About This Manual
E Series User Manual xvi ni.com
monospace italic Italic text in this font denotes text that is a placeholder for a word or value
that you must supply.
Platform Text in this font denotes a specific platform and indicates that the text
following it applies only to that platform.
Related Documentation
Each application software package and driver includes information about
writing applications for taking measurements and controlling measurement
devices. The following references to documents assume you have
NI-DAQ 8.0 or later, and where applicable, version 7.0 or later of the NI
application software.
NI-DAQ for Windows
The DAQ Getting Started Guide describes how to install your NI-DAQmx
for Windows software, how to install your NI-DAQmx-supported DAQ
device, and how to confirm that your device is operating properly. Select
Start»All Programs»National Instruments»NI-DAQ»DAQ Getting
Started Guide.
The NI-DAQ Readme lists which devices are supported by this version of
NI-DAQ. Select Start»All Programs»National Instruments»NI-DAQ»
NI-DAQ Readme.
The NI-DAQmx Help contains general information about measurement
concepts, key NI-DAQmx concepts, and common applications that are
applicable to all programming environments. Select Start»All Programs»
National Instruments»NI-DAQ»NI-DAQmx Help.
The Traditional NI-DAQ (Legacy) User Manual contains an API overview
and general information about measurement concepts. Select Start»All
Programs»National Instruments»NI-DAQ»Traditional NI-DAQ
(Legacy) User Manual.
NI-DAQmx for Linux
The DAQ Getting Started Guide describes how to install your
NI-DAQmx-supported DAQ device and confirm that your device is
operating properly.