Adding measurements to an ni-motion application, Adding measurements to an ni-motion application -2 – National Instruments NI-Motion User Manual
Page 25
Advertising
Chapter 2
Creating NI-Motion Applications
2-2
ni.com
Figure 2-1. Generic Steps for Designing a Motion Application
Adding Measurements to an NI-Motion Application
Figure 2-2 illustrates an expanded view of the topics covered in Part III,
, of this manual. For information about items
in the diagram, refer to Chapter 12,
.
Getting Started with NI-Motion
for NI 73xx Motion Controllers
Determine the system requirements
Determine the
required mechanical system
Connect the hardware
Configure the controller using
MAX
Test the motion system
Plan the moves
Create the moves
Add measurements with data
and/or image acquisition (optional)
Measurement & Automation
Explorer Help for Motion
Part III:
Programming with NI-Motion
Advertising