Ricoh Aficio MP 6000 - Manual (Page 112)

Copier/Document Server Features
102
3
Stamp Text
This section describes the user tools in the Stamp Text menu under Stamp.
Default settings are shown in bold type.
❖ Font
You can select the Stamp Text font.
The default setting is Font 1.
❖ Size
You can set the Stamp Text size.
The default setting is Auto.
❖ Superimpose
You can have the Stamp Text printed in white when it overlaps black parts of
the image.
The default setting is Off.
❖ Stamp Setting
You can specify how Stamp Text is printed.
• Stamp Position
You can specify where to print the Stamp Text.
The default setting is Top Right.
• Stamp Position
You can adjust the position of the Stamp Text within the available range as
shown below.
Metric version:
• “Top Left”…T/B: 4-144mm, L/R: 4-144mm
• “Top Center”…T/B: 4-144mm, L/R: 72-72mm
• “Top Right”…T/B: 4-144mm, L/R: 4-144mm
• “Bottom Left”…T/B: 4-144mm, L/R: 4-144mm
• “Bottom Center”…T/B: 4-144mm, L/R: 72-72mm
• “Bottom Right”…T/B: 4-144mm, L/R: 4-144mm
Inch version:
• “Top Left”…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• “Top Center”…T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• “Top Right”…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• “Bottom Left”…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• “Bottom Center”…T/B: 0.1"-5.7", L/R: 2.8"-2.8"
• “Bottom Right”…T/B: 0.1"-5.7", L/R: 0.1"-5.7"
• Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
The default setting is All Pages.