Ricoh Aficio MP 6000 - Manual (Page 183)

Box Settings
173
4
E
Select the box to program.
When programming a new box, press [Not Programmed].
To change a box already programmed, press it, and then proceed to step H . If
a password is programmed, enter the password, press [OK], and then proceed
to step
H .
F
Press [Information Box].
G
Enter a box name, and then press [OK].
H
Enter the SEP Code.
To change the SEP Code, press [Clear] or the {Clear/Stop} key, and then try
again. To change the box name, press [Box Name], and then repeat the proce-
dure from step
G .
I
Press [Password].
If you do not want to program a password, proceed to step
L .