Ricoh Aficio MP 6000 - Manual (Page 135)

Reception Settings
125
4
❖ Stored Reception File User Setting
The administrator can be specified for managing documents stored on the
machine after fax documents are received. To specify the administrator, enter
the administrator user code for managing documents using Web Image Mon-
itor or DeskTopBinder.
You must register the administrator's User Code to the destination list in ad-
vance.
This function is only available when [Store] is selected in “Reception File Set-
ting”.
It is recommended that you use a Web Image Monitor operating under the
same network environment as this machine. Otherwise, the Web browser
may not open and an error may occur.
The default setting is Off.
A Press [Facsimile Features].
B Press [Reception Settings].
C Press [Stored Reception File User Setting].
D If you want to use a user code, press [On].
E Press the Destination key of the user you wish to specify, and then press
[OK]
.
F Check the selected user, and then press [OK].
When a programmed user is deleted from the destination list, message
“Deleted from Address Book” is displayed. Enter the user again.
G Press the {User Tools/Counter} key.
If the programmed user code was deleted using the Address Book Manage-
ment function under System Settings, you cannot view received and saved
documents using a Web Image Monitor. Select [Off] in step
or reprogram
the user code.