Ricoh Aficio MP 6000 - Manual (Page 280)

Registering Addresses and Users for Facsimile/Scanner Functions
270
7
LDAP Authentication
This section describes how to register LDAP Authentication.
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand.
Important
❒ When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program / Change LDAP Server of
Administrator Tools settings applies.
❒ If there is user authentication in place, check with the administrator.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program / Change] is selected.
You can search by the registered name, fax number, user code, folder name,
or e-mail address, or IP-Fax destination.
E
Press the name you want to register or enter the registered number using
the number keys.
F
Press [Auth. Info], and then press [TNext].
G
Press [Specify Other Auth. Info] on the right side of LDAP Authentication.