Ricoh Aficio MP 6000 User Manual
Page 29
Network Settings
19
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒ When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col]
and [POP3 / IMAP4 Settings].
❒ When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]
.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Interface Settings/Network Permit SNMPv3 Communication
As required
Interface Settings/Network Permit SSL / TLS Communication
As required
Interface Settings/Network Host Name
As required
File Transfer
SMTP Server
Necessary
File Transfer
SMTP Authentication
As required
File Transfer
POP before SMTP
As required
File Transfer
Reception Protocol
As required
File Transfer
POP3 / IMAP4 Settings
As required
File Transfer
Administrator's E-mail Address
As required
File Transfer
E-mail Communication Port
As required
File Transfer
Program / Change / Delete E-mail
Message
As required
File Transfer
Scanner Resend Interval Time
As required
File Transfer
Number of Scanner Resends
As required
Heading
Setting Item
Setting Requirements