Ricoh Aficio MP 6000 - Manual (Page 188)

Facsimile Features
178
4
J
Specify End Receivers with Destination keys, and then press [OK].
You can change the display to the fax destination, Internet fax destination,
and IP-Fax destination using the key on the left side of the display.
A reception station can also be registered as a group destination. In such a
case, a maximum of 500 parties including End Receivers 1-5 can be specified
in a group.
To register another End Receiver, repeat from step
I .
K
To program a password, press [Password].
If you do not want to program a password, proceed to step
N .
L
Enter a password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK]
, and then try again.
M
Re-enter the password, and then press [OK].
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK]
, and then try again.
To change the password after pressing [OK], press [Change] and repeat steps
L and M , or press [Cancel] and repeat from step K .
N
Press [OK].
O
Press [Exit].
P
Press the {User Tools/Counter} key.