Ricoh Aficio MP 6000 - Manual (Page 171)

Special Senders to Treat Differently
161
4
Authorized RX (Authorized Reception)
This section describes how to specify Authorized Reception.
Specify when programming a Special Sender.
A
Press [Authorized Reception per Sender].
B
Press [On] or [Off], and then press [OK].
Reception File Print Qty
This section describes how to specify Reception File Print Qty.
Specify when programming a Special Sender.
A
Press [RX File Print Qty per Sender].
B
Press [Number of Sets].
C
Enter the print quantity using the number keys, and then press [OK].
Note
❒ Selecting [Same as Basic Settings] will result in the same setting made for
“RX File Print Qty” of “Reception Settings”.
❒ If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK] , and then try again.