Ricoh Aficio MP 6000 - Manual (Page 250)

Registering Addresses and Users for Facsimile/Scanner Functions
240
7
To locate the SMB folder manually
A
Press [Change] under “Path”.
B
Enter the path where the folder is located.
C
Press [OK].
If the format of the entered path is not correct, a message appears. Press [Exit],
and then enter the path again.
Note
❒ Enter the path using this format: “\\ServerName\Share- Name\PathName”.
❒ You can also enter an IPv4 address.
❒ You can enter a path using up to 256 characters.
To locate the SMB folder using Browse Network
This section describes how to locate the SMB folder using Browse Network.
A
Press [Browse Network].
Work groups on the same network are displayed.
Network display only lists client computers you are authorized to access.
B
Select the work group.
Computers in the selected work group are displayed.
C
Select a client computer.
Shared folders under it appear.
You can press [Up One Level] to switch between levels.
D
Select the folder you want to register.
E
[OK] .