Ricoh Aficio MP 6000 - Manual (Page 199)

System
189
5
❖ Bypass Tray Setting Priority
You can specify which of the two options, (Printer) Driver / Command or
Machine Settings, has priority for determining the paper size for the bypass
tray.
The default setting is Driver / Command.
❖ Edge to Edge Print
You can select whether or not to print on the entire sheet.
The default setting is Off.
The 5 mm margin along the edges may not be printed properly.
❖ Default Printer Language
You can set the default printer language if the machine cannot find the printer
language automatically.
The default setting is PCL.
This menu appears only when the PostScript 3 unit (optional) is installed.
❖ Tray Switching
You can set to switch the paper tray.
The default setting is Off.
❖ Collate Type
Set the default collate type if the machine cannot obtain the collate type infor-
mation from the host computer.
The default setting is Collate.
❖ Stapling Type
Set the default staple type if the machine cannot obtain the staple type infor-
mation from the host computer.
This menu appears only when a finisher (optional) is installed.
The default setting is Off.
❖ Punch Type
You can set the default punch type if the machine cannot find the printer lan-
guage automatically.
This menu appears only when the optional punch is installed.
Displayed items will differ depending on the finisher type, the original's ori-
entation, the paper size, and the orientation type.
The default setting is Off.
Reference
p.3 “Accessing User Tools”
“Loading paper”, Troubleshooting