Ricoh Aficio MP 6000 - Manual (Page 50)

System Settings
40
2
❖ Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
The default setting is Up.
❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
The default setting is Copier.
❖ Print Priority
Print Priority is given to the mode selected.
The default setting is Display Mode.
When [Interleave] is selected, the current print job will be interrupted after a
maximum of five sheets.
❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function.
This is useful if you are making many copies and have to change settings for
each copy. If you set a longer reset period, you can prevent interruption from
other functions.
The default setting is Set Time, 3 second(s).
When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
❖ Interleave Print
Set the number of sheets to be output at the time of operation by interruption.
The default setting is 10 sheet(s).