Ricoh Aficio MP 6000 - Manual (Page 263)

Registering Folders
253
7
Changing NCP settings
This section describes how to change NCP settings.
A
Select the type of connection.
B
Press [Change] of path name.
C
Enter the name of the path on which the folder is located, and then press
[OK]
.
D
Press [Connection Test] to make sure the path is correctly set up.
E
When you have made the necessary changes to the information, press [OK].
F
Press [Exit].
Note
❒ To specify a folder, enter its path directly or select it using Browser Net-
work.
Reference
p.251 “To locate the NCP folder manually”
p.251 “To locate the NCP folder using Browse Network”
To change the protocol
This section describes how to change the protocol.
A
Press [SMB], or [FTP].
B
A confirmation message appears. Press [Yes].
Changing the protocol will clear all settings made under the previous proto-
col.
C
Enter each item again.
Reference
p.237 “Using SMB to Connect”
p.244 “Using FTP to Connect”