Settings required to use internet fax, Ethernet – Ricoh Aficio MP 6000 User Manual
Page 25
Network Settings
15
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings required for using Internet Fax with an Ethernet
connection.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Interface Settings/Network Host Name
As required
Interface Settings/Network Machine Name
As required
Interface Settings/IEEE 802.11b Communication Mode
Necessary
Interface Settings/IEEE 802.11b SSID Setting
As required
Interface Settings/IEEE 802.11b Channel
As required
Interface Settings/IEEE 802.11b Security Method
As required
Interface Settings/IEEE 802.11b Transmission Speed
As required
Menu
User Tool
Setting Requirements
Interface Settings/Network Machine IPv4 Address
Necessary
Interface Settings/Network IPv4 Gateway Address
Necessary
Interface Settings/Network DNS Configuration
As required
Interface Settings/Network DDNS Configuration
As required
Interface Settings/Network Domain Name
As required
Interface Settings/Network WINS Configuration
As required
Interface Settings/Network Effective Protocol
Necessary
Interface Settings/Network Ethernet Speed
As required
Interface Settings/Network LAN Type
Necessary
Interface Settings/Network Permit SNMPv3 Communication
As required
Heading
Setting Item
Setting Requirements