Zhone Technologies 900 - Manual (Page 127)

Data Cards IMACS System Release 5.1.6 5-13
BRI Card BRI Card User Screens and Settings
Table 5-6. BRI-ST*8 Card Configuration Option Settings and Defaults
Notes:
1. SRV functions (P1, P2 and P3) may be activated from the Conversion Screen when an
ADPCM server is installed.
2. D-Channels will only show if brite is selected for Type.
3. These options are only available for LB GEN Modes of ddsT and ddsN. See LB GEN
paragraph below.
TERMINAL
For the BRI U*8 and BRI-SC U*8 cards:
conVert The Conversion feature allows the B channels to be used with ADPCM
compression features.
Eoc Embedded Operations Channel (not yet supported)
Ntu Network Terminating Unit programming. (not applicable to 8262).
Test Initiates and monitors testing of all BRI card ports. See Test section.
Perf Shows the performance statistics for the port highlighted. See the Performance
Monitoring section. Not implemented in S/T card.
Main Returns to the main terminal screen. If changes are made to settings and not
saved, users will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
TERMINAL nt-pp nt-sb nt-eb te nt-pp
TYPE lease brite lease
B MODE none B1 B2 B1+B2 128K none
B1 WAN/SRV none w1-1 w1-2 w2-1 w2-2 w3-1 w3-2 w4-1
w4-2 P1 P2 P3 1 none
B1 TS n/a 01 to 24 01 to 31 n/a
B2 WAN/SRV none w1-1 w1-2 w2-1 w2-2 w3-1 w3-2 w4-1
w4-2 P1 P2 P3 1 none
B2 TS n/a 01 to 24 01 to 31 n/a
D WAN none w1-1 w1-2 w2-1 w2-2 w3-1 w3-2 w4-1
w4-2 P1 P2 P3 2 none
D TS n/a 01 to 24 01 to 31 2 n/a
D SUBCHAN n/a off 1 2 3 4 2 n/a
LOCAL LB off ta net off
LB CHAN B1 B2 B1+B2 B1
LBGEN MD ddsT ddsN v54T v54N ft1T ft1N ddsT
LB GEN off B1ocu B1csu B1ds0 B1dsu B2ocu B2csu
B2ds0 B2dsu 3 off
RCVE n/a n/a
TR COND n/a n/a