Zhone Technologies 900 - Manual (Page 28)

1-16 IMACS System Release 5.1.6 Data Cards
Model No. Running Head HSU Card User Screens and Settings HSU Card
TS
The TS (time slot) setting identifies the time slots on the WAN link when wan is the
WAN/SRV setting. Unlike other user cards, the HSU Card can use many time slots on a single
WAN port to create a super-rate circuit for an individual HSU port. One or all DS0 time slots
on a single T1 or E1 link can be assembled for use by an HSU port in order to satisfy the speed
requirements of the DTE.
The time slot numbers range from 1 to 24 for T1 links and 1 to 31 for E1 links. However, time
slot 16 is not available on E1 links programmed for CAS or CCS signaling. Figure 1-9 shows
the display when table is selected. Using the space bar to select and deselect the time slot, this
example shows time slots 11 to 16 on WAN 1-1 assigned to this port. The time slot
assignments do not have to be contiguous on any card port.
Note: Do not change this parameter when the HSU Card is linked to an ISDN-PRI
connection.
Figure 1-9. Typical HSU Port Time Slot Assignment Screen