Zhone Technologies 900 - Manual (Page 142)

5-28 IMACS System Release 5.1.6 Data Cards
Model No. Running Head BRI Card User Screens and Settings BRI Card
Figure 5-13. Remote NTU Configuration Screen (2560/2561 or 2200E/2201E)
Table 5-18. Remote NTU Configuration Screen Actions
Table 5-19. Remote NTU Configuration Option Settings and Defaults
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Data is not automatically updated on screen. Press "r" to show updated data.
Load Loads currently saved parameters from the NTU.
Write Saves configuration information to the NTU.
Test Brings up the NTU Test Screen (see next section of this chapter).
stAtus Brings up the NTU Status Screen (see NTU Status section of this chapter).
Main Returns to the BRI Card Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
DTE INTF TYPE v.24 v.36 1 ---
DTE SYNC/ASYN sync asy8 asy9 asy10 asy11 sync