Zhone Technologies 900 - Manual (Page 144)

5-30 IMACS System Release 5.1.6 Data Cards
Model No. Running Head BRI Card User Screens and Settings BRI Card
DTE DATA RATE
Asynchronous transmission allows for the following rates: <1.2k, 1.2k, 2.4k, 4.8k, 9.6k,
14.4k, 19.2k, 28.8k, or 38.4k.
Synchronous transmission allows for the following rates: 1.2k, 2.4k, 4.8k, 9.6k, 14.4k, 19.2k,
28.8k, 32k, 38.4k, 48k, 56k, 64k, 72k, or 128k.
CLOCK MODE
The only option available is int.
DCD OPTIONS
The Data Carrier Detect option can be off, on (default), or r_rts. The remote Ready To Send
option requires setting of the DCD OFF DELAY option.
DCD OFF DELAY
The Data Carrier Detect Off Delay setting is n/a (default) when the DCD OPTIONS selection
is either off or on. When DCD OPTIONS is set to r_rts, the Data Carrier Detect Off Delay
can be set to the following options (in bits): 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65,
70, 75, or 80.
If the user selects any other number, the value will be rounded up to the next option. For
example, if you enter 52, it would be rounded up to 55.
DSR OPTIONS
The Data Set Ready option can be set to off or on (default).
CTS OPTIONS
The Clear To Send option can be off, on (default), or l_rts. The local Ready To Send option
requires setting of the CTS ON DELAY option.
CTS ON DELAY
The Clear To Send On Delay setting is n/a (default) when the CTS OPTIONS selection is
either off or on. When CTS OPTIONS is set to l_rts, the Clear To Send On Delay can be set
either in bits or in milliseconds. The bits settings are 0, 10, 20, 30, 40, 50, or 60. The msec
settings are 10, 20, 30, 40, 50, 100, or 250 milliseconds.