Zhone Technologies 900 - Manual (Page 133)

Data Cards IMACS System Release 5.1.6 5-19
BRI Card BRI Card User Screens and Settings
TYPE
The Type settings are ppt (point-to-point) and nimpt (Non-Init-multipoint).
TEI VAL
The Terminal Identifier Value (TEI VAL) settings are n/a (if TEI AUTO is set to yes) and 0-63
(if TEI AUTO is set to no).
CHAN
The Channel (CHAN) settings are any, B1, B2 (B-Channel) or D for D-Channel.
5.3.7 Call Status Screen
The user can view the status of all calls on a BRI port from the Interworking Screen by
pressing “Q” (call reQ). Figure 5-9 shows the Call Status screen.
Figure 5-9. Call Status Screen