Zhone Technologies 900 - Manual (Page 92)

3-4 IMACS System Release 5.1.6 Data Cards
Model No. Running Head OCU-DP Card User Screens and Settings OCU-DP Card
Table 3-1. Main Screen Actions
Table 3-2. Main Screen Option Settings and Defaults
Notes:
1. When the WAN/SRV option is set to P1, P2, or P3 (Server cards), the only valid options
for RATE are 56K and 64K.
2. The maj-v option is supported on all cards if the Rate is 2.4, 4.8 or 9.6. Error Correction
is not supported if the Rate is sw56k. BCH Error Correction is not supported on the
5-port and 10-port OCU-DP card. The BCH algorithm is supported only at 19.2, 56,
and 64 kbps.
STATE
The State setting determines whether the port is active or inactive. An inactive port does not
occupy a time slot on a WAN link. Set the state setting to stdby (standby) for ports that are not
to be used or that are not yet configured. Set it to actv (active) for ports that are ready for use.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Perf Brings up the Performance Data Screen.
Test Initiates and monitors testing of all OCU-DP card ports. Refer to Test
section of this chapter.
Main Returns to the System Main Screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
WAN/SRV wan (w1-1 through w4-2) serv (P1 through P3) w1-1
TS 01-24 01-31 01
FRAME a b-5 b-10 b-20 a
RATE 2.4 4.8 9.6 19.2 56k 64k sw56k 1 2.4
SR TS 01 01-05 01-10 01-20 01
MODE ocu csu ocu
ERR COR off maj-v bch 2 off
SECOND n/a off on off
USER LB d o d
LB off dte net-d net-a off
LB GEN off ds0-n ocu-n csu-n csu-u off
LB DET w/to on off w/to