Zhone Technologies 900 - Manual (Page 50)

1-38 IMACS System Release 5.1.6 Data Cards
Model No. Running Head HSU Card User Screens and Settings HSU Card
1.3.7 Inverse Multiplexer (IMUX) Screen
The Inverse Multiplexer feature requires the installation of appropriate firmware. An
ISDN-PRI card is also required. The screens that follow will only appear when the system is
properly configured.
Figure 1-21 displays the IMUX screen. Table 1-14 lists the IMUX screen actions and Table
1-15 shows lists the available options with the settings and defaults.
Figure 1-21. IMUX Call Screen
Table 1-14. IMUX Call Screen Actions
Connect If the call placed to one of the Broadcast phone numbers fails to connect,
this command will attempt to reconnect the call.
Disconnect Breaks the connection of the number highlighted on the screen. The user
will be prompted with yes/no question before disconnecting.
Refresh Updates the connection status information.
Main Returns to the Call Profile screen.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e. performance and test data).