Zhone Technologies 900 - Manual (Page 129)

Data Cards IMACS System Release 5.1.6 5-15
BRI Card BRI Card User Screens and Settings
B1 WAN/SRV
The WAN setting identifies the WAN link for the first B-channel assigned to this port. It is not
necessary for all 8 ports on the same card to be assigned to the same WAN link, or to
contiguous time slots on a WAN link. If B1 needs to be assigned to FRS or ATM card then
“serv” under that P1 to P3 could be selected. If voice compression wants to be selected for B1
then B1 WAN/SRV needs to be assigned to WAN. ADPCM slot and RATE needs to be
selected from conVert screen.
B1 TS
The TS setting identifies the time slot on the WAN link for the first B-channel assigned to this
port. Values range from 1-24 for T1 links and 1-31 for E1 links. Time slot 16 is not available
on E1 links that are programmed for cas or ccs signaling. The up and down arrow keys are
used to scroll through the time slots. For a display of the available time slots, refer to the
cross-connect map for the WAN link. There is no assignment to a server.
B2 WAN/SRV
The WAN setting identifies the WAN link for the second B-channel assigned to this port. If
128K is selected for the B Mode, the second B-channel must be assigned to the same WAN
link as the first B-channel. If B2 needs to be assigned to FRS or ATM card then “serv” under
that P1 to P3 could be selected. If voice compression wants to be selected for B2 then B2
WAN/SRV needs to be assigned to WAN. ADPCM slot and RATE needs to be selected from
conVert screen.
B2 TS
The TS setting identifies the time slot on the WAN link for the second B-channel assigned to
this port. Values range from 1 to 24 for T1 links and 1 to 31 for E1 links. Time slot 16 is not
available on E1 links that are programmed for cas or ccs signaling. The up and down arrow
keys are used to scroll through the time slots. There is no assignment to a server.
D WAN/SRV
The D WAN setting identifies the WAN link for the D-channel assigned to this port for brite
circuits. It is not necessary for all ports on the same card to be assigned to the same WAN link,
or to contiguous time slots on a WAN link.