6 bri card specifications, Bri card specifications -44 – Zhone Technologies 900 User Manual

Page 158

Advertising
background image

5-44

IMACS System Release 5.1.6

Data Cards

Model No.

Running Head

BRI Card Specifications

BRI Card

6. At the local end (where the incoming BRI loss was first observed), use the loopback

and test signal functions of the BRI card to test the affected port. These tests are
accessible from the BRI Main Screen (through the LOCAL LB and related
parameters) and its associated Test Screen (through the BERT parameter), as
previously described in this chapter. These allow you to test the circuit path in segments
and thereby quickly pinpoint the problem.

7. If necessary, also perform loopbacks and send test signals to the affected circuit from

the other end. In addition, if it is an NTU circuit, you can perform end-to-end tests using
a suitable data test set at one or both ends of the circuit in conjunction with the loopback
functions of the BRI card or NTU at either end.

8. If the BRI card is determined to be faulty, replace it and return the faulty unit for repair

to the location specified by your distributor.

5.6

BRI Card Specifications

BRI Cards (826070, 826171, and 826270)

Physical Interface

Number of Ports

8

Capacity per port

Two B (64 kbps each) plus One D (16 kbps) channel

Physical Interface

Female 50-pin RJ-27X Telco connector

Electrical Interface

Model 826070 and 826171

2-wire, U-interface per ANSI T1.6014.2

Model 826270

4-wire, S/T-interface per ANSI T1.602/ITU I.430

Transmission Range Model 8260, 8261, 8262, and 826270)

Wire Gauge

22 AWG (.644 mm)
23 UK SWG

24 AWG (.511 mm)
25 UK SWG

26 AWG (.405 mm)
27 US SWG

Distance

26,000 ft. (7.9 km)

22,000 ft. (6.7 km)

18,000 ft. (5.5 km)

Transmission Range Model 8262
and 826270

Mode

Distance

NT p-p

max. 1500mm

NT s-b

max. 150m

NT e-b

max. 1500m, max. 35m between devices

Transmission Range

Code

Alternate Mark Inversion (AMI)

Rate

192Kbps + 100ppm

Timing

External and Internal (software configurable)

Remote NTU Configuration Options (for 256x or 22xx NTU’s only)

DTE Interface Type

V.36 or V.24

Synch/Asynch

Synchronous or Asynchronous Transmission

Advertising