Zhone Technologies 900 - Manual (Page 166)

6-6 IMACS System Release 5.1.6 Data Cards
Model No. Running Head PM-IOR Card User Screens and Settings PM-IOR Card
The time slot numbers range from 1 to 24 for T1 links, and from 1 to 31 for E1 links. However,
time slot 16 is not available on E1 links programmed for CAS or CCS signaling. Figure 6-3
shows the display when table is selected. Using the space bar to select and deselect the time
slot, this example shows time slots 11 to 16 on WAN 1-1 assigned to this port. The time slot
assignments do not have to be contiguous on any card port.
Figure 6-3. Typical PM-IOR Port time slot Assignment Screen
RATE
The Rate setting allows you to select the bandwidth for all time slots assigned to this port. The
available options are 56k or 64k. This selection is multiplied by the number of time slots
assigned to the port, to define the overall port speed. For example, if you choose 64k as the
port Rate and assign four time slots to that port, the overall port speed is 256 kbps.
Tx CLOCK
The Transmit Clock (Tx CLOCK) is a read-only field and is set to run on “int” clock source.