Zhone Technologies 900 - Manual (Page 164)

6-4 IMACS System Release 5.1.6 Data Cards
Model No. Running Head PM-IOR Card User Screens and Settings PM-IOR Card
Table 6-1. PM-IOR Card Main Screen Actions
Table 6-2. PM-IOR Card Setting Option Settings and Defaults
Notes:
1. The WAN/SRV parameter has three optional choices: wan, serv and user. In wan
mode, the options are w1-1 through w4-2. In serv mode, the option are P1-P3 and in
user mode, the options are U1-U8 (Port 1-4).
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically updated (i.e.,
performance and test data).
Copy Copies the contents of the current column to the next column. Useful if you change a lot of
entries in one column and want to repeat those changes in subsequent columns.
Test Initiates and monitors testing of all PM-IOR Card ports. Refer to the Test section of this chapter.
Dial Allows you to identify the PM-IOR port by telephone number, download and modify call
profiles from the Interface card, and dial and broadcast ISDN calls. This feature is not available
with this host release.
Perf Accesses the Performance Data Screen. This feature is not available with this release.
Main Returns to the System Main Screen. If changes are made to settings and not saved, you will be
prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
WAN/SRV wan serv user 1 w1-1
MODE dce (read-only) dce
TS table 2 table
RATE 64k 56k 56k
TX CLOCK int (read-only) int
CLOCK PLRTY norm (read-only) norm
DATA PLRTY norm (read-only) norm
CTS perm (read-only) perm
CTS DELAY 0 (read-only) 0
LOCAL LB off dte net off
LB GEN MODE dds v.54 ft1 dds
LB GEN off ocu csu (csu-1, csu-2) dsu ds0 (ds0-1, ds0-2) 3 off
LB DET w/to on off w/to
ISDN CONN no 4 no