Zhone Technologies 900 - Manual (Page 161)

Data Cards IMACS System Release 5.1.6 6-1
PM-IOR Card Introduction
Chapter 6
PM-IOR Card
6.1 Introduction
This chapter provides installation, configuration, and troubleshooting information for the
Port-Master Integrated Office Router (PM-IOR) Card.
The PM-IOR Card allows you to connect data communications equipment (DCE) to WAN
links, resource cards, and/or other PM-IOR cards.
6.2 PM-IOR Card Description
6.2.1 PM-IOR Card Description (828060)
The PM-IOR Card supports one V.35 CPE data device. Each card port can be configured to
operate as DCE, with data speeds ranging from 56 or 64 kbps to 1.544 or 2.048 Mbps.
6.2.1.1 Card Jumpers/Switch Settings
There are two dip switches located on the front panel of the PM-IOR card. The dip switches
must be set prior to connecting a terminal/PC to the console port “CO.” This port is used to
configure the router portion of the card. The two dip switches must be set as illustrated in
Figure 6-1 below.