Zhone Technologies 900 - Manual (Page 71)

Data Cards IMACS System Release 5.1.6 2-5
SRU Card SRU Card User Screens and Settings
Table 2-2 lists the SRU Card Main Screen parameters and available option settings.
Table 2-2. Main Screen Option Settings and Defaults
Notes:
1. Time slot 16 is not available if the port is assigned to an E1 WAN link whose TS 16 is
programmed for cas or ccs.
2. Speeds of 0.3, 1.2, and 14.4 are not supported for synchronous channels (except 14.4 sync
with FRAME set to adpcm or hlink).
3. Communication Configuration is a three step process. This field will show n/a when sync
is chosen as the INTF option.
4. Majority Error Correction is a two step process. You will only see the choices off and on.
When on is chosen, the other alternatives will appear.
Copy Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Test Initiates and monitors testing of all SRU card ports. Refer to the Test section
of this chapter.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby act stdby
WAN/SRV none wan (w1-1 through w4-2) serv (P1 through P3) w1-1
TS 01-24 01-31 1 01
FRAME a b-5 b-10 b-20 x.50 adpcm hlink nlink a
RATE .3 1.2 2.4 4.8 9.6 14.4 19.2 28.8 38.4 2 .3
SR TS n/a 1 1-5 1-10 1-20 1
INTF asyn sync v.14 asyn
8 7 6 5 8
COM CF 1 2 3 1
none odd even space mark none
CTS perm l0 l30 l60 l100 rl0 rl3 rl6 rl10 off perm
TX CLK n/a int ext n/a
LB off dte net off
LB GEN n/a off ocu csu dsu off
LB DET n/a w/to on off off
DL OPT off on off
ADPCM n/a P1 P2 P3 n/a
MAJ ERR off on none 10e-3 10e-4 10e-5 10e-6 10e-7 4 off