AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 151)

151 MD Evolution – Dialog 4425 IP Vision
More Features of Your Extension
Notes:
Your system administrator or facility’s attendants have the
ability to access all charge counters. They (system
administrator/attendants) are the only ones who may reset
the charge counters to zero. See the “ Services Reserved for
Attendants ” section.
Your extension may also be subject to call detailed records.
This usually involves your outgoing external calls, however
they may also refer to your internal and incoming calls. These
records save the details for each involved call: number
called, date and time, length, etc. These records are generally
used by your system administrator to monitor your tele-
phone facility’s invoicing. If necessary, contact your system
administrator for more details.
Account Codes
According to your working mode, you may wish to impute the cost
of your external calls to different accounts. Your telephone system
can do this through account codes that you simply enter when
placing outgoing external calls.
To establish an outgoing external call using an account code, after
lifting the handset or in handsfree mode:
NET. PREF.
z
First, dial the network access prefix adapted to this service.
Generally, this consists of a network access prefix that is reserved
for placing outgoing external calls that are subject to account codes.
Ask your system administrator for this prefix.
ACCOUNT C.
z
Then, directly dial the account code to which your external
call should be imputed.
Account code formats are a fixed length. All account codes are
typically 4 digits, however they may reach up to 15 digits in length.
Generally, they end with “#”, which acts as a separator. In all cases,
account codes are defined by your system administrator.
EXT. NO.
z
Next, dial the desired external phone number.
Your outgoing external call is then transmitted over the public
network, just as an external call without an account code would be.
Then, your call is subject to a call detailed record which will not only
contain the date, time, number called, length, and cost of the call,
but also the account code that you entered. This then can be used
to invoice your clients.