AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 96)

Call Forwarding Services
MD Evolution – Dialog 4425 IP Vision 96
It may also consist of an external number containing up to 18 digits,
including the network access prefix. This may be an external number
that is accessible through abbreviated dialling.
You may use a fixed call forward defined by your system administrator.
This may consist of a call forward on no-answer condition, a call
forward on busy condition, or a call forward on no-answer and busy
conditions.
This fixed call forward is applied by default whenever you do not
define a variable call forward for your calls. This is often the case
when your facility uses an integrated voice mail, which – by default
– receives your calls encountering a no-answer or busy condition.
You may define all of the types of call forwards listed above, on your
own. This is referred to as a variable call forward that takes prece-
dence over a possible fixed call forward.
This variable call forward may be:
•
A pre-defined call forward assigned to the Call-Fwd (call forward)
key on your extension. This is valid for all types of call forwards,
except call forward on mini-message. Simply pressing this Call-
Fwd (call forward) key will then either activate or de-activate the
pre-defined variable call forward.
• A variable call forward defined on a case by case basis. This is
valid for any type of call forward that is immediately activated
after it has been defined. This then will take precedence over a
call forward that was pre-defined on the Call-Fwd key.
In any case, only one call forward applies at any given moment.
Defining a new variable call forward automatically cancels any
definition that previously existed.
A variable call forward is usually defined on a case by case basis
before you leave your extension. You may also remotely define your
call forward recipient from his/her internal extension. This is the
“Follow me” or “Third party call forward (or remote call forward)”
service.
The call forwards previously mentioned are predefined call forwards.
Finally, your extension also offers you the call deflection service.
This is a call forward activated when an incoming call is presented
to you, on a call-by-call basis, in cases where you would rather not
answer that specific call, thus directing it to another recipient.