AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 203)

203 MD Evolution – Dialog 4425 IP Vision
Services Reserved for Attendants
When necessary, the “Erase” option (located where “Select” usually
is) enables you to correct the last character entered. This option is
displayed after the first character is entered.
In any case, as you press the keypad keys, the corresponding
letters are displayed on the screen.
3 times
Þ
Press three times the dynamic function key shown on the left
until the “OK” option is highlighted.
The dynamic option “Erase” becomes “Select”.
Select Press the dynamic function key shown on the left.
A message is displayed, confirming that the new abbreviated
number was successfully saved (or modified or deleted).
Notes:
The “Trunk” field corresponds to the outgoing trunks group
used to place a call that was dialled using abbreviated
dialling. Generally, the value “1” corresponds to the public
network trunks group, and does not need to be modified.
When a particular need arises, the alternative values possible
are from “2” to “8”. Contact your system administrator for
more information.
An abbreviated number is generally complete. The
“Completed” field displays the number “1”. An abbreviated
number may possibly be incomplete, in which case those
who use it must complete it manually, each time it is used.
This may, for example, allow access to a series of external
numbers using just one abbreviated number. In the latter
case, modify the “Completed” field to “0”.
When modifying an existing abbreviated number, the
“Erase” function enables you to modify or delete all or a
portion of an existing programming.
You may program abbreviated numbers one after another
using the “NEXT” function, and by only selecting the “OK”
option when you have realized all your programming.