AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 197)

197 MD Evolution – Dialog 4425 IP Vision
Services Reserved for Attendants
Select Press the dynamic function key shown on the left.
You may then proceed with the selected system programming.
You will be prompted to validate your programming at each step.
In each case, you then return to the previous system management
welcome screen.
Then, to exit the system management mode:
Press and hold the centre navigation key on your extension
for 2 seconds.
Your extension returns to the idle status.
Note: Access to the system programming services is
granted when your attendant position is in either active
or inactive mode.
Reinitialising an Extension’s User
Password
Each extension, as well as your attendant’s position, is assigned a
user password that controls access to certain telephone services.
Each user has the option of managing his/her password. However,
if the user forgets his/her password, the only option is for him/her
to contact an attendant (or the system administrator) to have it re-
initialised (see also the “ Programming Your Extension’s Services ”
section).
To reinitialise the user password assigned to an extension, once
the system management mode accessed:
ÅÆÇ
SYSTEM MANAGEMENT
1 Internal cost 2 External cost
3 Update the system date 4 Short number
Reset password 6 Incoming calls stats
BACK
Options Ы Ю Select
5