AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 171)

171 MD Evolution – Dialog 4425 IP Vision
Programming Your Extension’s Services
OLD PSW
z
Enter your current user password.
Þ
Press the dynamic function key shown on the left.
NEW PSW
z
Next, enter your new user password.
For both entries, use your extension’s keypad, holding each key
down for approximately 2 seconds; if necessary, use the “Erase”
option to cancel the last character entered.
Þ
Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.
The dynamic option “Erase” becomes “Select”.
Select Press the dynamic function key shown on the left.
The following screen is displayed, confirming that your new
password has been saved.
Select Press the dynamic function key shown on the left.
The service programming menu welcome screen is re-displayed.
Note: If you ever forget your password, you can request
that it be re-initialised, either by a facility attendant, or by the
system administrator. It will then be reset to “1234” until you
change it once again.
UPDATE PASSWORD
Current password: < **** >
New password: < **** >
BACK
Options Ы Ю Select
OK
REPORT
The requested service is accepted:
The password is updated
BACK
Options Ы Ю Select
OK