AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 57)

57 MD Evolution – Dialog 4425 IP Vision
Operations for Outgoing Calls
Or, to call the attendants:
9
z
Dial the number 9 (generally).
Or, for an external call:
0 + EXT. NO
z
Dial the ad-hoc network access prefix, followed by the number
for the external party to be reached.
Note: The prefix to dial for external calls is generally “0” to
access the public network. Accessing a private network
depends on your facility’s configuration.
Calling with Abbreviated Dialling
(Speed Dialling)
You may also place your external calls more quickly by using the
abbreviated dialling (speed dialling) service.
This enables you to contact your external parties using shorter
numbers than the norm, usually just 3 or 4 digits.
Usually, you will have access to a general list of abbreviated numbers
valid for all users in your facility.
Additionally, based on your user rights, you may also have access
to a personal list of 20 abbreviated numbers that are either personal,
or shared among a restricted group of users.
All of these abbreviated numbers are managed by your system
administrator or possibly your facility’s attendants. Contact them as
needed.
To contact an external party using abbreviated numbers, after
lifting the handset or in handsfree mode:
2
z
Dial “2”, giving you access to abbreviated dialling.
ABBR. NO
z
Then directly dial the abbreviated number associated with
the external party to be contacted.
Call Press the dynamic function key shown on the left.
The call is then established just as if you had manually dialled the
external party’s number.