AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 158)

Physical Programming of Your Extension
MD Evolution – Dialog 4425 IP Vision 158
Select Press the dynamic function key shown on the left.
Your extension then displays the number identifying the ring
melody that is currently selected, and prompts you to enter a different
melody number.
MELODY NO
z
Dial a ring melody number.
The selected ring melody is played; a different one is played each
time you enter a new ring melody number.
Save Press the dynamic function key shown on the left.
The ring melody corresponding to the last number entered is pro-
grammed, a confirmation screen is displayed for several seconds,
and then the welcome screens for the physical programming of
your extension are re-displayed.
Your extension’s ring volume can be set directly on your extension
– when not in programming mode – either when your extension is
idle, or when it is being rung by an incoming call. Under these
conditions: ì
Simply press either the + or - keys to increase or decrease
the ring volume.
Your extension’s ring volume increases or decreases as you press
the keys.
This adjustment is saved for all subsequent incoming calls, until you
adjust it once again.
The selected ring volume is also indicated by the icon shown on the
left when your extension is idle or ringing.
Note: The type of ring that is defined is applicable for both
internal and external calls. These, however, are
distinguished by different cadences: the cadence is faster
for incoming calls.
CallList PhoneBook WAP Services
Ring Character
Current ring character: 5
Enter new character (0-9) : _
Cancel Save
Settings