AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 76)

Operations during a Call
MD Evolution – Dialog 4425 IP Vision 76
Call Parking and Parked Call Retrieving
When you are carrying on a single conversation, you may park the
current call, in order to subsequently retrieve it on a different exten-
sion. For example, this would allow you to change offices without
losing your call.
To do so, whether you are carrying on a conversation using the
handset or handsfree mode:
L3
Ô
Press a free line key of your extension for which LED is not lit.
Your party is then placed on hold.
10
z
Dial the prefix “10”, granting access to the call parking
service.
ID. CODE
z
Dial the identification code for the call you wish to park.
This call identification code will be requested later when you retrieve
the parked call. This code is unrestricted, and may consist of 1 or
2 digits, according to your facility’s configuration (usually 2 digits).
Call Press the dynamic function key shown on the left.
A confirmation that the service was accepted is provided both visually
and audibly; the “Accepted Service” message is displayed on the
screen, and the accepted service tone is played. d
or
í
Hang up the handset, or press the “C” key to end this service
in handsfree mode.
Your extension returns to the idle status.
You may then move about freely, then return to the parked call on
any other extension.
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
WESSON Paul 407 405
Hold Conf/Transf
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
Enter number: 10xx 405
Erase Call