AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 165)

165 MD Evolution – Dialog 4425 IP Vision
Programming Your Extension’s Services
Note: The configuration of your extension’s services is
saved in a centralised location. Therefore, these settings will
not be lost, even if power to your extension is interrupted.
Moreover, these settings follow you whenever you sign on
to an IP H.323 extension other than your own.
Accessing Your Extension’s Service
Programming Mode
When your extension is idle, to access your extension’s service
programming mode:
Menu Press the Menu key on your extension.
The following screens are displayed when you access your
extension’s service programming mode.
N times
Þ
Repeatedly press the dynamic function key shown on the left
in order to highlight the number “n”, which corresponds to
the feature you wish to program.
Select Press the dynamic function key shown on the left.
You may then proceed with programming the selected feature. You
will be prompted to validate your programming at each step (see
details to follow).
PROGRAMMING
General calling ACTIVE
1 Hunt group ACTIVE
2 Call forward UNACTIVE
3 Appointment reminder UNACTIVE
4 Prefixes consultation
Options Ы Ю Select
PROGRAMMING
2 Call forward UNACTIVE
3 Appointment reminder UNACTIVE
4 Prefixes consultation
5 Cost consultation
6 Update password
Options Ы Ю Select
0