AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 52)

Operations for Incoming Calls
MD Evolution – Dialog 4425 IP Vision 52
Rejecting a Call
You may also reject a call that is presented to you that you would
prefer not to answer.
To reject a call that is presented:
Reject Press the dynamic function key shown on the left.
Your extension returns to idle status, and according to the case:
•
If your extension is set for the call forward on no-answer condition,
the calling party is immediately forwarded to the pre-defined
number – for example your facility’s voice mail (if applicable).
See the “ Call Forwarding Services ” section.
• By default, your calling party’s call is freed, and he/she hears the
busy signal.
No matter what the case, the information concerning this call – name
and number of the caller, as well as the date and time of the call
– are transferred to the call list for your extension, making it available
for future reference, if necessary. See the “ Directory, Phone Book
and Call List ” section.
Ending a Call
To end a call: d
Hang up the handset.
Your extension returns to idle status.
Or, for handsfree mode:
í
Press the “C” key to end the call in handsfree mode.
Your extension returns to idle status.
Settings CallList PhoneBook WAP Services
15:49 07 Nov 2008
SMITH Peter
WESSON Paul 407 405
Reject