Silent ringing function – AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 55

Advertising
background image

55

MD Evolution – Dialog 4425 IP Vision

Operations for Incoming Calls

Notes:

The prefix “13” is the one usually used to access the indi-

vidual call pick-up service. It may, however, have been

modi-

fied by your system administrator.

Rather than dialling the number of the extension to pick-up,

you may also press the repertory key where this number

may have been saved.

Your extension may also be subject to call pick-ups from

third party sets.

Certain extensions (such as yours) may possibly be equipped

with a permanent protection against call pick-up. If this is

the case, this service will obviously be refused on these

extensions (and vice-versa).

Silent Ringing Function

This function may be used when you wish to not be disturbed by the

ringing of the telephone. When it is activated only your extension’s

screen display and the flashing of a line key will advise you of a new

incoming call.
To activate this function from an idle extension:

É

Press this key to activate silent ringing for incoming calls.

The associated LED will remain lit to remind you that this function is

activated.
A crossed-out musical note will also be displayed on your

extension, temporarily replacing the icon that usually displays your

extension’s ring volume level.

Settings

CallList

PhoneBook WAP Services

CS

GC

15:49

07 Nov 2008

SMITH Peter
405

Log off

2 Missed

Advertising