AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 61)

61 MD Evolution – Dialog 4425 IP Vision
Operations for Outgoing Calls
CONGESTED • The line you are calling is congested, therefore it is not possible
to place your call on camp-on. You also hear the busy tone.
If your party is busy, your call may be automatically camped-on for
the dialled extension, and you will hear the automatic camp-on tone.
You may then simply wait for your party to answer.
To proceed with your call, in terms of the requested internal party’s
status, you may also:
•
Activate the automatic call-back feature for the called extension
that is busy.
• Activate the automatic call-back feature for the called extension
that is free, but is not answering.
Automatic Call-Back on Busy Condition
When placing a call to an internal party whose extension is busy
and you would rather not wait on the phone, you may activate the
automatic call-back on busy condition for the called extension.
This if valid no matter your called party’s status: “RING”, “WAIT”,
“BUSY” or “CONGESTED”. To do so:
CALL_BACK Press the dynamic function key shown on the left.
You will receive both visible and audible confirmation for registering
automatic call-back for your call: “REGISTERED CALL-BACK” will
be displayed on your screen, and the service acceptance tone will
be played.
Settings CallList PhoneBook WAP Services
WAIT 15:49 07 Nov 2008
SMITH Peter
WESSON Paul 407 405
CALL_BACK
Settings CallList PhoneBook WAP Services
WAIT 15:49 07 Nov 2008
SMITH Peter
WESSON Paul 407 405
CALL_BACK