Barcode options – Printronix N7000 H-Series Cartridge Ribbon Printer User Manual
Page 126
126
Chapter
4
IGP/PGL Emulation
Barcode Options
The following sub-options help define specific options regarding barcode
printing.
UPC Descenders
This parameter allows you to print barcode descenders when human
readable data is not present in the UPC/EAN barcodes.
•
Always
(default). UPC/EAN barcodes are printed with descenders, even
if there is no human readable data.
•
Never
. UPC/EAN barcodes are printed without descenders if there is no
human readable data.
•
Only with PDF
. UPC/EAN barcodes are printed with descenders only
when the PDF command is present.
Optimized Ratio
This option selects different barcode ratios for certain barcodes including
Code 39 and I-2/5. It is included for compatibility with the IGP-X00 printers.
•
Disable
(default). Use standard barcode ratios.
•
Enable
. Select the alternate barcode ratios.
I-2/5 Selection
This option is added to be compatible with a special IGP-X00 customization.
Usually, if I-2/5 barcodes have an odd number of digits, a leading zero is
inserted in front of the data. However, this special IGP-X00 customization
gives you the option of adding a space character at the end of the barcode
instead.
•
Leading Zero
(default). A leading zero is inserted in front of the printable
data field.
•
Trailing Space
. A space is inserted at the end of the printable data field
and a zero is encoded with the corresponding space in the end of the
barcode.
•
X2 DPD
. When selected, an I-2/5 barcode with an X2 magnification will
use the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for
compatibility issues.
•
Modulo 7 CD
. The I-2/5 barcode uses a modulo 7 check digit instead of
the default modulo 10 check digit.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
•
Disable
(default). The printable data field is printed with the AI enclosed
in parentheses. This is the standard EAN/UCC-128 format.
•
Enable
. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.