Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 138)

138
Chapter 4 IGP/VGL Emulation
Ignore Spaces
• Disable (default). Trailing spaces are not deleted from the last
alphanumeric element in a graphics pass.
• Enable . Trailing spaces are deleted from the last alphanumeric element
in a graphics pass.
Midline PY (includes ^PN)
• Disable (default). The Graphics mode Enable command, ^PY, must be
the first three characters of a line.
• Enable . The ^PY or ^PN can occur anywhere in a line.
Print Quality
• Data Processing (default). ALPHA text and barcodes are printed in
normal mode at 60 x 72 dpi. This mode should be set if the highest speed
is desired.
• High . ALPHA text and barcodes are printed in dark mode at
120 x 72 dpi.
Expanded Font
• Scalable (default). These expanded characters have rounded edges.
• Block . These are block characters compatible with IGP-X10 printers.
LP+ Font
• Disable (default). The IGP/VGL uses its default half-dot font, which is
slightly different from the standard bitmap font used by LP+ at 12, 13, 15
and 17 cpi.
• Enable . The IGP/VGL uses the same font as used by LP+ at all cpi.
MSI Check Digit
• Print (default). The check digit is appended at the end of the printable
data field for MSI barcodes.
• Don't Print . The check digit for MSI barcodes does not print.
I25 Selection
• I25 Odd Data (default). When an odd number of data is provided, the
default setting, Leading Zero, will add a zero to the beginning of the bar
code data. The setting, Check Digit, will add a check digit to the end of the
bar code data so that the results add up to an even number of data.
• Convert Alpha . Disable is the default. When enabled, each non-digit I25
bar code character will convert to “0.”
NOTE: If you use an Interleaved 2/5 barcode that automatically adds the
check digit (type code k or l, IBARC type code INT2/5CD or INT2/
5CDA), the check digit is added regardless of how this parameter is
set.