Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 137)

IGP/VGL Submenu
137
Append Rotated
• Disable (default). Logos and alphanumeric strings are treated as
separate elements.
• Enable . Appends logos to an alphanumeric string rotated in a clockwise,
counterclockwise, or inverted orientation.
Truncate Alpha
When enabled, this parameter prevents the printing of Error 48 (Element Off
Page Error) if alphanumeric data, including spaces, extends beyond the right
side of the form. The options include:
• Enable (default)
• Disable
True Vert 1/10
• Disable (default). A vertical 1/10 of an inch parameter is used as 7/72 of
an inch. The absolute move is slightly smaller than expected. For
example, a one-inch move would be 70/72 of an inch. Vertical moves that
have the same value are identical in length.
• Enable . A vertical 1/10 inch parameter is used as 1/10 inch. Rounding
occurs to the nearest 1/72 inch. This can cause vertical moves that have
the same value to differ by
±
1/72 inch.
Absorb After ^PY
• Absorb Motion (default). The first paper motion following a ^PY
command is ignored.
• Absorb All . The system ignores all the data and terminator until a host
generated motion terminator is detected.
• Disable. System terminators following a graphics command are sent to
the printer and result in paper motion.
UPC Descenders
• Enable (default). UPC/EAN barcodes are printed with descenders, even
if there is no human readable data.
• Disable . UPC/EAN barcodes are printed without descenders if there is no
human readable data.
Rot. Char Size
• Adjusted (default). Rotated (clockwise/counterclockwise), expanded
characters have a different size than an unrotated character with the
same size parameters.
• Not Adjusted . Rotated, expanded characters are the same size as
unrotated characters with the same size parameters.