Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 129)

IGP/PGL Submenu
129
Compatbl. Mode
This option instructs the PGL to behave similarly to older versions of the IGP
with respect to certain commands.
All new users with new applications should select the “None” option. Selecting
this mode insures the printer will behave as described in this manual.
When replacing an older product operating with an existing application,
especially those using the PMODE and SMODE commands, you may need to
select a compatibility mode. In this case, select the printer model number
option that most closely matches the printer being replaced. The Compatibility
Mode options include:
• None (default)
• MVP
• L150
• P3000
• P6000
• P9000
Expanded Font
This option defines the type of expanded characters the PGL will select:
• Scalable (default). These expanded characters have rounded edges.
• Block . These are block characters compatible with the
IGP-X00 printers.
• Alt Block 1 / Alt Block 2 . Reserved block sets used only for compatibility
purposes.
Scalable Size
• Normal (default). Controls the size of scalable characters to be either
normal size (as set by the user) or adjusted to match the size of block
fonts. This is the default.
• Block . Adjusts the size of scalable characters to exactly match its block
font alternative.
True Form Slew
This option is related to slewing within forms when using the PMODE
command. Customers with new applications are advised to keep this option
enabled.
• Enable (default). Form length is accurate according to the form length
parameter in the CREATE command.
• Disable . Form length is IGP-X00 compatible when using PMODE.