Printer control, Ribbon end point – Printronix N7000 H-Series Cartridge Ribbon Printer User Manual
Page 145
IGP/VGL Submenu
145
PRINTER CONTROL
Ribbon End Point
This parameter adjusts the point at which the system will declare the ribbon
as being expended. The life count will always be from 100% to 0%, but if a
darker setting is selected 0% will be reached more quickly. If a lighter setting
is selected, the system will extend the time it takes to reach 0%. The range of
values are as follows:
•
Normal
(default)
•
Darker +1 through Darker +6
•
Lighter -1 through Lighter -10
NOTE:
This value can be adjusted at any time and the display will
automatically adjust to show the correct percentage relative to the
new end point.
Unidirectional
Accented
Char
Open Platen
@BOF
Tear Bar
Dist.
1
Display
Language
Disable*
Enable
Standard*
Tall
Disable*
Enable
7.46 inches.*
(4.5 - 10.5)
English
Simp. Chinese*
* Factory Default
1
Available for Pedestal printers only.
2
Available for N7000 STD Firmware only.
3
Default value for H-Series printers.
Bar Code
Quality
2
Dark*
Draft
Ribbon End
Point
Darker +6
Darker +5
Darker +4
Darker +3
Darker +2
Darker +1
Normal*
Lighter -1
Lighter -2
Lighter -3
Lighter -4
Lighter -5
Lighter -6
Lighter -7
3
Lighter -8
Lighter -9
Lighter -10
View
Function
1
Disable*
Enable
PRINTER
CONTROL
ADVANCED USER