Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 131)

IGP/PGL Submenu
131
Error Report
Sets the error reporting capability for IGP/PGL forms.
• On (default). Form boundary error checking reported. Any element which
falls off the current page is reported as an error.
• Debug Mode . The printer is put in debug mode whenever a form is
defined in Create Form mode. Each line of the Create Form is printed
along with an error if one occurred. This is the same functionality as if
there were a slash (/) entered before the Create Form Name.
• Fault . When an error occurs, the error is printed and the message “IGP/
PGL ERROR” appears on the printer front panel. The printer then stops
printing and goes offline. The error must be cleared before the printer can
resume normal operation.
• Off . No form boundary checking. Graphic elements appear clipped if they
are beyond the page boundaries.
Select Font
Allows you to choose from various character sets, including IGP/PGL
Standard sets, 256 character multinational sets, and UTF-8 encoded
Unicode™.