Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 56)

56
Chapter 4 Configuration Overview
Optimizing Print Speed (N7000 STD Only)
LP+, IGP/PGL, and IGP/VGL Emulations
The printer has been configured at the factory for optimal print speed. To
optimize print quality instead, you can change values for specific configuration
parameters such as Barcode Quality and Print Quality. Doing so, however,
will decrease the printer speed.
If you have optimized the printer for print quality, you can change it to optimal
speed by selecting the values as follows:
• Bar Code Quality (Printer Control menu): Select Draft.
(See page 57 for the Configuration Main Menu, and see page 146 for a
written description of Bar Code Quality.)
• Print Quality (IGP/PGL emulation): Select Dataprocessing. (See
page 122 for the IGP/PGL Configuration Menu, and see page 130 for a
written description of Print Quality.)
• Print Quality (IGP/VGL emulation): Select Dataprocessing. (See
page 134 for the IGP/VGL Configuration Menu, and see page 138 for a
written description of Print Quality.)