Printronix N7000 H-Series Cartridge Ribbon Printer - Manual (Page 127)

IGP/PGL Submenu
127
Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code. This allows access for the alternate set
of control function characters. See the description of the Code 128 barcodes
in the
IGP/PGL Programmer's Reference Manual for details.
User-Def Ratio
• Enable (default). User-defined ratios are accepted for barcodes. This is
the default.
• Disable . User-defined ratios are ignored and the magnification X1 is used
in its place.
C39 Compatbl.
This menu makes the old method of decoding C39 alternative character set
compatible with the new.
• Disable (default) Uses the current way of decoding.
• Enable . Matches the old method of decoding.
Host Form Length
Determines whether the form length specified in the CREATE command
changes the form length designated in the LP+ menu when the form is printed
by the EXECUTE command.
• Disable (default). The LP+ form length is unaffected by the form being
printed.
• Enable . The LP+ form length changes to match the length of the PGL
form being printed.
Var Form Adjust
(Ranges from 0 - 30) . Default is 0. This menu value is tenths of inches. The
value of this menu specifies the amount of distance to add to PGL forms that
have variable form lengths. Variable length forms are forms that are defined
by using a “;0” in the CREATE statement: ~CREATE;FORM;0. Variable form
lengths are defined by the contents within the form - the form is only as long
as necessary to print the form. Changing this menu value adds additional
lengths to the form (in tenths of inches). Again, this only applies to forms that
use the “;0” variable length forms.