Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-1895 - Manual (Page 11)

3. Electrical Installation
PNEG-1895 V2 Electronic Distributor Control 11
Electric Motor Wiring Diagram
The electric motor supplied with the GSI Electronic Distributor Control system is designed to be capable
of running on either low or high voltage. The variable frequency drive (VFD) supplied with the system
supplies 230V 3 phase power and requires that the electric motor be configured for low voltage operation.
In order to ensure proper operation, verify the motor jumpers are configured in accordance with the wiring
diagram shown for low voltage operation.
(See Figure 3D.)
Figure 3D